Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Abilene Homeowners
A chimney that looks fine from the living room can hide a cracked flue, a failing liner, or a heavy creosote load that nobody sees until it becomes a real problem. That’s the gap a proper inspection closes. We handle the whole cycle here at Chimney Sweep Abilene – the sweep, the inspection, and the repair – so when we find something, you get a fix from the same company instead of a report and a list of other people to call.
Our technicians have up to experience, and we work with professional-grade brands like DuraFlex, HeatShield, and Olympia Chimney. If you’ve noticed a smell, a draft, or staining on the masonry, don’t wait on it. Call (888) 359-2615 and we’ll book you a time. Same-day service is often possible.
Fireplace Inspection
Fireplace Inspection is the close look at the firebox, damper, smoke chamber, and the first section of flue above the fire, and it’s what tells you whether your fireplace is safe to light this season. You need it when you’ve just moved into a home with a wood-burning or gas fireplace, when you can’t remember the last time it was checked, or when smoke has been rolling into the room instead of up the chimney. Chimney Sweep Abilene handles this on the same visit as a sweep, checking the firebox brick and mortar joints, the damper operation, and the smoke chamber for gaps and buildup. A fireplace-only inspection in Abilene typically runs around $99 to $175, while a fireplace inspection paired with a full sweep usually lands in the $175 to $300 range, depending on how much soot and creosote we’re dealing with. The written estimate sets the final price.
Inside the Firebox
We check the firebox for loose brick, crumbling mortar joints, and cracks in the back wall that let heat reach the masonry behind. The fireplace is where the highest temperatures concentrate, so this is often where the first real wear shows up. Gas inserts get their own look at the burner, logs, and vent connection.
The Damper and Smoke Chamber
The damper should open fully and seal well when closed – a stuck or warped one is a common cause of smoke in the room. Above it, the smoke chamber’s sloped walls can collect soot and creosote in a way that’s easy to miss from below. We check the slope and look for gaps that let smoke bypass the flue.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the full evaluation of your chimney system – from the flue and liner up through the crown at the top – and they’re what turn a guess into real information about your chimney’s condition. You need an inspection before the first burn of the season, after any chimney fire, when you’re buying or selling a home, or when something just feels off. Chimney Sweep Abilene pairs every inspection with repair capability, so findings don’t sit in a folder waiting for another contractor. Our technicians have up to experience and bring camera equipment, so the evidence is theirs to show you. A standard inspection in Abilene is typically $99 to $175; when a full sweep is included, expect about $175 to $300. The written estimate sets the final price.
What We Look At
We examine the flue liner, the crown, the cap, the flashing, the masonry joints, and the firebox as a single system, because a problem in one part usually explains trouble in another. We photograph anything that needs attention and walk you through it. Nothing is recommended without evidence you can see for yourself.

Choosing the Right Level
Not every chimney needs a camera or a full tear-down to be inspected properly. A straightforward annual check calls for a basic visual inspection, while a sale, a change in appliance, or any suspected damage calls for a deeper one. We’ll tell you which level fits your situation rather than defaulting to the most involved option. If a repair is needed, we handle the sweep and the fix as one job.

Chimney Flue Inspection
Chimney Flue Inspection focuses on the flue itself, the channel that carries smoke and gases out of the house, and it’s the part of an inspection most likely to turn up something invisible from the room. You need it when you’ve had a fire, when you’ve noticed draft problems or odors, or when the chimney hasn’t been checked in a year or more. Chimney Sweep Abilene inspects the flue from bottom to top, checking for cracks, gaps in the liner, creosote glazing, and blockages. A flue-only evaluation in Abilene runs about $99 to $175, and combining it with a sweep brings it to the $175 to $300 range. The written estimate sets the final price.
Liner and Joint Checks
The liner is what protects the masonry from heat and corrosive gases, so any break in it matters. We check clay tiles for cracks and gaps, and stainless liners like DuraFlex for seams, connections, and wear. On chimneys with offsets or non-standard flue configurations, flexible liner systems are what make a proper repair possible.
Offsets and Difficult Flue Shapes
Plenty of older chimneys in Abilene don’t run straight up – they jog around structure, which makes them harder to inspect and repair. Camera equipment lets us see around those bends instead of guessing. It also means we can line a chimney that a rigid-liner crew might turn down.
Chimney Fire
Chimney Fire is what happens when creosote or soot built up inside the flue ignites, and even a small one can crack a liner or damage masonry in ways that aren’t obvious from outside. You need an inspection after any chimney fire, however minor it seemed, before you light the fireplace again. Chimney Sweep Abilene inspects the flue and firebox for heat damage, checks whether the liner survived, and recommends a repair path if it didn’t. A post-fire inspection in Abilene is about $99 to $175; if a HeatShield ceramic resurfacing repair is needed, we’ll quote that separately in the written estimate. The written estimate sets the final price.
What a Chimney Fire Leaves Behind
Creosote burns hot enough to warp metal liners and crack clay tiles, and the damage isn’t always visible from the firebox. A cracked liner lets heat reach framing and lets carbon monoxide escape into the home. We look for warping, cracked tile, and discolored masonry before we clear a fireplace for use again.
Repair After the Fire
If the liner is damaged, the fix depends on the extent. HeatShield ceramic resurfacing restores a liner that’s still structurally sound without the cost of full replacement, while a compromised flue calls for relining. Either way, we can do the repair on the same job, so you’re not coordinating two contractors. Call (888) 359-2615 to book an inspection.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the deeper evaluation that adds a video camera scan of the flue plus a look at accessible parts of the chimney, including the attic and crawl spaces, and it’s the level most real-estate transactions and most damage concerns require. You need one when you’re buying or selling a home, after a chimney fire, when you’ve switched appliance types, or when a simpler inspection turned up something that needs a closer look. Chimney Sweep Abilene uses camera equipment to scan the flue and documents findings with photographs. A Level 2 inspection in Abilene is typically $150 to $275, and it’s also the natural starting point when a sweep turns up signs of trouble. The written estimate sets the final price.
What’s Different From a Basic Check
A basic inspection covers what’s visible from the firebox and the roof without tools. A Level 2 adds a camera run down the flue and a check of the accessible chimney structure in the attic and crawl spaces. That extra access is why it’s the standard for a home sale.
When the Sale Requires It
Most lenders and buyers expect a Level 2 inspection on a home with a fireplace before closing. It documents the condition of the chimney for both sides of the transaction. We provide photographs, so the report isn’t just a checkbox.
Chimney Leak
Chimney Leak is water finding its way into the chimney structure, usually at the crown, the flashing, or the cap, and it’s one of the most common things we find on a roof-side inspection in Abilene. You need a leak inspection when you see stains on the ceiling near the chimney, rust on the damper, crumbling mortar, or damp masonry after rain. Chimney Sweep Abilene traces the leak back to its source rather than just sealing everything in sight. A leak inspection in Abilene is about $99 to $175, and if a cap or crown repair is needed, that goes in the written estimate. The written estimate sets the final price.
Where Water Gets In
The crown, the flashing where the chimney meets the roof, and a missing or worn cap are the usual suspects. Cracks in the crown let water soak into the masonry, and a missing cap lets rain straight down the flue. We check each one and photograph what we find.
Sealing and Capping Repairs
A properly fitted cap from a line like Gelco or Famco keeps rain and animals out while letting smoke escape. Crown cracks get sealed with a proper repair mortar, not a tube of caulk. If the masonry has been saturated, we’ll tell you whether it also needs a sweep and a closer look before you burn.
Chimney Camera Inspection
Chimney Camera Inspection is the video scan that lets us see the inside of the flue around bends, offsets, and turns without taking anything apart, and it’s how we find damage that a visual look from the firebox simply can’t reveal. You need one after a chimney fire, when buying a home, when the flue could be blocked, or when draft problems have no obvious cause. Chimney Sweep Abilene runs a camera down the full length of the flue and shows you the footage. A camera inspection in Abilene is typically $150 to $275, and we include photographs of anything worth noting. The written estimate sets the final price.
Seeing the Full Flue
A camera shows us the liner joints, any cracks or gaps, the condition of the smoke shelf, and any blockage such as a bird’s nest or a fallen tile. It’s the only way to be certain about a flue that bends around structure. We walk you through the footage so the findings aren’t just our word.
Findings You Can Act On
The camera scan tells us whether the liner can be restored with HeatShield ceramic resurfacing or needs full relining with a flexible system. That difference usually decides whether the fix is a modest repair or a bigger job. Either way, you see the evidence before you decide.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service DuraFlex liner systems and know where the seams and connections wear after years of heat cycles, including on chimneys with offsets that a rigid liner can’t handle. We also work with HeatShield ceramic resurfacing for liner restoration, and know when a flue is a good candidate for it versus when it needs full replacement. Our technicians have up to experience with these materials, and the right repair is chosen by the condition of your flue, not by what’s easiest to sell.
We also service Olympia Chimney components and Gelco caps, covers, and venting hardware, so when the fix is a fitted cap or a venting connection, we’re working with parts that fit properly. Famco product lines are in the mix too for properly fitted caps and covers. Whether you have DuraFlex, Olympia Chimney, or any other make, we can help.
Signs You Need a Pro Right Now
- Smoke rolling into the room. A fireplace that smokes back into the house is usually telling you the flue is blocked, the damper isn’t opening fully, or the draw is compromised. It won’t clear up on its own, and it gets worse as buildup grows.
- A strong creosote smell. A sharp, tarry odor from the fireplace, especially in warm weather, points to heavy buildup in the flue. That buildup is the fuel for a chimney fire, so it’s worth a look before burn season.
- Stains or dampness near the chimney. Water stains on the ceiling or damp masonry on the chimney itself mean a leak is at work. Left alone, water degrades mortar and interior framing over time.
- Cracked or loose masonry. Loose brick or crumbling joints in the firebox or on the chimney chase signal that the structure needs attention. Cracks in the wrong place can let heat reach framing.
- You can’t remember the last inspection. If the chimney hasn’t been checked in over a year, or you’ve just moved in, you don’t have a baseline. An inspection gives you one and documents the condition for the future.
Our Process, Step by Step
- 1
Book the visit. We schedule a time that works for you and confirm what to expect on the day. We answer 24/7 on the phone line, and dispatch runs 7am to 7pm, Sunday through Friday. There’s no obligation to book a repair on the spot.
- 2
Protect the space and sweep. We lay drop cloths around the hearth and run a proper sweep with the right brushes, so soot and dust stay contained. The sweep is included with most inspections and gives us a clear view of the flue.
- 3
Inspect the full system. We check the firebox, damper, smoke chamber, flue, crown, cap, and flashing, and we run a camera down the flue when the level of inspection calls for it. Everything we find is photographed.
- 4
Review findings with you. We walk you through what we saw and what it means for safety and for your options. If the chimney is in good shape, we’ll tell you so plainly, and if a repair can safely wait, we’ll say that too.
- 5
Quote or book the repair. If work is needed, you get a written estimate with the price set per job. We handle the sweep, inspection, and repair under one company, so nothing falls through the cracks between contractors.
How Much Does Chimney Inspection Cost in Abilene?
A chimney inspection in Abilene typically runs $99 to $175 for a standard visual inspection, and about $175 to $300 when the inspection is bundled with a full sweep. A Level 2 or camera inspection is usually $150 to $275 depending on the flue’s configuration and how much of the system needs a closer look. Repairs, when needed, are quoted separately in writing.
Several things move the price. The level of inspection matters most – a basic visual check costs less than a camera scan. How much soot and creosote is in the flue affects how long the sweep takes. The shape of the chimney matters too; a chimney with offsets or a non-standard flue configuration takes more time to inspect properly than a straight one. Access to the roof and the height of the chimney also factor in.
To avoid overpaying, ask for the scope of the inspection in writing before the visit, and ask specifically whether a camera is included. Be wary of any price quoted before anyone has looked at your chimney. What you get from us is a flat price agreed before booking, camera inspection and a photo report where the level calls for it, and a repair quote based on evidence you can see. If nothing is wrong, we’ll say so.
Call (888) 359-2615 for an exact quote – estimates are free.
Our Service Area Near Abilene
We handle chimney inspection and repair throughout Abilene and the surrounding towns, including Potosi, Clyde, Tye, Merkel, Baird, Anson, Hawley, Buffalo Gap, and Tuscola. Booking is straightforward wherever you are in the area, and we schedule visits around the season rather than the hour. If you’re outside Abilene proper, let us know your town when you book and we’ll confirm the schedule.
Serving Abilene, TX – Our Local Coverage Area
We serve Abilene and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Abilene
A chimney inspection is a professional evaluation of your chimney system – firebox, damper, flue, liner, crown, cap, and flashing – to confirm it’s safe to use and to catch problems early. It’s different from a sweep, which removes soot and creosote; an inspection tells you the actual condition of the chimney after the buildup is gone. At Chimney Sweep Abilene we usually do both on the same visit. Call (888) 359-2615 for an exact quote – estimates are free.
A standard inspection usually takes 45 minutes to an hour and a half, and a Level 2 or camera inspection takes longer, sometimes two hours depending on the flue configuration. A sweep combined with an inspection takes a bit more time than either alone. We’ll give you a time estimate when you book so you can plan your day. Call (888) 359-2615 for an exact quote – estimates are free.
A standard inspection in Abilene is typically $99 to $175, and a Level 2 or camera inspection runs about $150 to $275. When the inspection is combined with a full sweep, expect $175 to $300 depending on buildup and flue configuration. The written estimate sets the final price, and there’s no obligation to book a repair. Call (888) 359-2615 for an exact quote – estimates are free.
Yes – we work with DuraFlex liner systems and HeatShield ceramic resurfacing, along with Olympia Chimney components and Gelco caps and venting hardware. That means we can inspect your liner and, if it needs repair, restore or replace it with materials suited to your flue. Whether you have DuraFlex, Olympia Chimney, or any other make, we can help. Call (888) 359-2615 for an exact quote – estimates are free.
Same-day service is often possible, and dispatch runs 7am to 7pm, Sunday through Friday, with Saturday closed. The phone line is answered 24/7, and a call outside dispatch hours is booked into the next opening. We don’t promise a specific arrival window over the phone, but we’ll confirm timing when you book. Call (888) 359-2615 for an exact quote – estimates are free.
What warranty comes with the inspection and any repair?
We stand behind the work and any rep